C-TEK Vehicle battery charger battery charger 12 volt / 10 a

For batteries larger vehicles, supply function


The MXS 10 is a fully automatic 8-speed charger with a charging current of 10 A for 12 V batteries between 20 AH and 200 AH and for the maintenance charge of batteries up to 300 AH. It has a battery diagnosis that determines whether the battery can absorb and hold loads, a recond mode for reconditioning deep-reloading batteries in which acid stories have formed, a winter program for charging in cold environments and an AGM option to maximize the lifespan Most start/stop batteries. In addition, the MXS 10 has a temperature sensor to optimize the charging process and can be used as a power supply for 12 V devices.

Attention: The battery charger is delivered with a pre-assembled fixed adapter of 2-pin EU plugs to 2-pin T26 plugs.

Technical data:

Battery types: lead-acid batteries, maintenance-free, AGM, gel, calcium calcium batteries

Battery capacity: charges batteries with 20 to 200AH, preservation load 300AH

Load outputs: 1

Sermons: -

Dimensions: 190 x 95 x 52mm

Weight: 0.9kg

Display: none

Loading cycles: 8-stuffed

Protection devices: protected against dust and splash water, spark protected, reversal and short-circuit-proof.

Recommended areas of application: perfect for car, motorboat, sailboat, caravan, tractor, ATV batteries

Protection class: IP65

Scope of delivery: power cable and 2 different battery connection cables

Charging functions:         
        
Step 1 desulphation
Recognizes sulfated batteries. In this way, power and voltage pulsate and remove sulfate from the lead plates of the battery, which restores the battery capacity.

Step 2 soft start
Check the load capacity of the battery. This step prevents the loading process from continuing with a defective battery.

Step 3 Bulk
Load with maximum current to the reach of approx. 80% of the battery capacity.

Step 4 absorption
Loading with weak ones will be powered by up to 100% of the battery capacity.

Step 5 analysis
Test of the load maintenance of the battery. Batteries that cannot hold your load must be replaced.

Step 6 Recond
Select the RECOND program to enter the reconditioning step into the charging process. While
The reconditioning step is increased the voltage to create controlled gas formation in the battery. In the formation of gas, the battery acid is mixed, which gives energy back to the battery.

Step 7 Float
The battery voltage is kept at its maximum value by loading it with constant voltage.

Step 8 pulse
The battery capacity is kept at 95 100%. The charger monitors the battery voltage and, as soon as necessary, gives a charging pulse to keep the battery completely charged.

EAN: 7350009568227
Manufacturer: MXS 10

brand	C-tek
Weight kg	0.8
Article group	Vehicle battery chargers
Manufacturer number	DE1207-0719